CS501 Grand Quiz by Junaid

CS501 GRAND QUIZ

1. The multiplexer------------is used to decide which value is transferred to be written back to the register file. MP2 MP3 MP4 MP5
2. Which of the following condition is evaluated when executing the branch instruction “brzr R2, R1”? If(R2==0) If( R1 >0 ) If( R1==0) If( R1 < 0)
3. In case of SRC processor, bits---------of IR (instruction register) are reserved for the opcode. 0 to 4 11 to 15 27 to 31 59 to 63
4. Which of the given RTL description is used to represent “load instruction register” (ldr) instruction? (op<4..0>=6): R[ra] rel (op<4..0>=2): R[ra] M [rel] (op<4..0>=2): M[disp] R [ra] CONCEPYUAL (op<4..0>=2): M[rel] R [ra]

5) -------- Instruction is used to divide a register value by immediate value in FALCON-E processor. div idiv divi divim

6. Which field of machine language instruction is the “type of operation” that is to be performed. Op-code(or the operation code) CPU register Memory Cells I/O Location
7. Which of the following control signal is NOT activated during instruction fetch operation? PCout LC LMAR Cout
8. In case of FALCON-A------------ instruction are present which are not present in SRC processor. create and destroy in and out open and close read and write
9. ----------- provides a temporary storage for the address of memory location to be accessed. MAR MBR PC LPC
10. Which of the following register is used to enable the tri-stable buffers with the MBR? MBRout MARout LMBR INC4

Q11. What functionality is performed by the instruction “str R8, 34” of SRC?

It will load the register R8 with the contents of the memory location M[34]

It will store the register R8 contents to the memory location M[34]

12. Program Counter(PC) holds the memory address of: Previous Instruction Current Instruction Next Instruction Previous and Current Instruction

Q13. What is the working of Processor Status Word (PSW)?

To hold the current address of the process

14. mul is the example of a(n)------------ operation. Logic Shift
15. Control Signal for RTL “IR< ---MBR” will be--------- MBRout,LIR PC< --C PC< --MBR PC< --IR

Q16. What does the instruction”ldr R3, 58” of SRC do?

It will store register R3 contents to the memory location M[PC+58] It will store the value of register R3 at the relative address itself(PC+58)

17. The status register of the 68000 has -------- condition codes.

Q18. Which of the instruction is used to load register from memory using relative address?

ld instruction ldr instruction lar instruction str instruction

19. For the ------ type instruction, we require a register to hold the data that is to be loaded from the memory, or stored back to the memory. Jump Control L load/store Branch
20. In a processor, ----------- is responsible for the synchronization of internal as well external events. Memory Unit Data Unit Arithmetic & Logic Unit Control Unit
21. In CPU design, ------------ creates or forms the interface between the data path and control unit. Buses ALU

cache

22. ----------- Control signal enables the input to the PC for receiving a value that is currently on the internal processor bus. LPC INC4 LC Cout
23. In SRC, the effective address is computed a run-time by adding a constant to value of---------- register. FLAGS IR PC Ra
24. --------- control signal allow the content of the program counter register to be written onto the internal processor bus. INC4 LPC PCout LC
25. In ---------- instruction format of EAGLE processor, there is no field reserved for the operands. Type V Type Y